Getting Started - Kenwood KDC-X798 Manual De Instrucciones

GETTING STARTED

1
Cancel the demonstration
When you turn on the power (or after you reset the
unit), the display shows: "CANCEL DEMO" "PRESS"
"VOLUME KNOB"
1
Press the volume knob.
[YES] is selected for the initial setup.
2
Press the volume knob again.
"DEMO OFF" appears.
2
Set the clock
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press
the knob.
3
Turn the volume knob to select [CLOCK ADJUST], then
press the knob.
4 Turn the volume knob to make the settings, then
press the knob.
Day Hour Minute
5
Turn the volume knob to select [CLOCK FORMAT], then
press the knob.
6
Turn the volume knob to select [12H] or [24H], then
press the knob.
7 Press and hold to exit.
To return to the previous setting item or hierarchy, press
.
4
3
Set the initial settings
1 Press B SRC to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3 Turn the volume knob to make a selection (see the following table), then press the knob.
4
Press and hold to exit.
To return to the previous setting item or hierarchy, press
AUDIO CONTROL
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches, 6×9 inches
or 6 inches) or OEM speakers for optimum performance.
DISPLAY
EASY MENU ON: Both display and button illumination change to white color when entering [FUNCTION]. ;
OFF: Both display and button illumination remain as [COLOR SELECT] color. ( 20)
TUNER SETTING
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;
MIX: Memorizes one station or SiriusXM channel for each preset button, regardless of the
selected band or SiriusXM channel.
KDC-X798
TAGGING SETUP
: FRONT USB/ REAR USB: Selects the USB input terminal for tagging if two iPod
devices are connected.
SYSTEM
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. ( 9)
IHEART SRC ON: Enables IHEARTRADIO in source selection. ; OFF: Disables. ( 10)
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 8)
CD READ 1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as an
music CD. No sound can be heard if an audio file disc is played.
F/W UPDATE
UPDATE SYSTEM / UPDATE BT
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
.
Default: XX