Before Use - JB Systems BEAT 6 Mk2 Manual De Instrucciones

ENGLISH
OPERATION MANUAL
FEATURES
• 12 inputs on 6 channels (7line, 2phones, 3micros)
• 1 separate balanced DJ micro with talkover
• Gain, treble, mid, bass controls on all channels
• Assignable and easy replaceable crossfader
• High quality, easy gliding "steel rail" DJ faders
• 2 Master outputs with individual balance controls
• Master1 with balanced XLR outputs
• LED VU-meters on input channels and masters
• Automatic beat counters with offset indicators
• Crossfader starts for compatible CD players
• Pre-fade listening with cue mix option

BEFORE USE

Check the contents:
Check that the carton contains the following items:
• Mixer
• Operating instructions
JB SYSTEMS 1/34
OPERATION MANUAL
BEAT6 Mk2
ENGLISH
SAFETY INSTRUCTIONS:
CAUTION
The lightning flash with arrowhead symbol within the equilateral triangle is
intended to alert the use or the presence of un-insulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the
user to the presence of important operation and maintenance (servicing)
instructions in the literature accompanying this appliance.
To prevent fire or shock hazard, do not expose this appliance to rain or moisture. Do not
place metal objects or spill liquid inside the turntable. Electric shock or malfunction may
result.
INSTALLATION GUIDELINES:
• Install the unit in a well-ventilated location where it will not be exposed to high
temperatures or humidity.
• Placing and using the unit for long periods near heat-generating sources such as
amplifiers, spotlights, etc. will affect its performance and may even damage the unit.
• The unit can be mounted in 19-inch racks. Attach the unit using the 4 screw holes on
the front panel. Be sure to use screws of the appropriate size. (screws not provided)
Take care to minimize shocks and vibrations during transport.
• When installed in a booth or flight case, please make sure to have good ventilation to
improve heat evacuation of the unit.
• To avoid condensation to be formed inside, allow the unit to adapt to the surrounding
temperatures when bringing it into a warm room after transport. Condense sometimes
prevents the unit from working at full performance.
CLEANING THE MIXER:
Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside
the unit. Do not use volatile liquids such as benzene or thinner which will damage the unit.
CONNECTIONS
Except for microphones, headphone and master outputs, all connections are cinch. Use
good quality cinch-cinch cables to prevent bad audio quality. (example: JB Systems code:
2-0370)
For more information on connections, please refer to the next chapter.
Be sure to turn off the mixer before you make changes to the different connections.
In this manual we talk about "line inputs". This is a global name for inputs with a level
between 750mV and 2V. This includes tuners, videos, CD-players, etc.
JB SYSTEMS 2/34
OPERATION MANUAL
CAUTION: To reduce the risk of electric shock,
do not remove any cover. No user-serviceable
parts inside. Refer servicing to qualified service
personnel only.
BEAT6 Mk2