Apéndice A - Información De Certificaciones; European Directive Information; Other Approval; Sanitary Approval - SMAR LD303 Manual De Instrucciones, Operacion Y Mantenmiento

Tabla de contenido

Publicidad

Apéndice A

Other Approval

INFORMACIÓN DE CERTIFICACIONES

European Directive Information

Authorized representative in European Community
Smar Gmbh-Rheingaustrasse 9-55545 Bad Kreuzanach
PED Directive (97/23/EC) – Pressure Equipment Directive
This product is in compliance with the directive and it was designed and manufactured in
accordance with sound engineering practice using several standards from ANSI, ASTM, DIN and
JIS.
EMC Directive (2004/108/EC) - Eletromagnetic Compatibility
The EMC test was performed according to IEC standard: IEC61326-1:2006, IEC61326-2-3:2006,
IEC61000-6-4:2006, IEC61000-6-2:2005. For use in environment only.
Keep the shield insulated at the instrument side, connecting the other one to the ground if
necessary to use shielded cable.
ATEX Directive (94/9/EC) – Equipment and protective systems intended for use in potentially
explosive atmospheres.
This product was certified according European Standards at NEMKO and EXAM (old DMT). The
certified body for manufacturing quality assessment is EXAM (number 0158).
LVD Directive 2006/95/EC – Electrical Equipment designed for use within certain voltage
limits
According the LVD directive Annex II the equipment under ATEX "Electrical equipment for use in an
explosive atmosphere" directive are excluded from scope from this directive.
The EC declarations of conformity for all applicable European directives for this product can be
found at www.smar.com.

Sanitary Approval

Certifier Body: 3A Sanitary Standards
Model Designations: LD303 with or without extension
Sensors and Sensor Fittings and Connections Used on Fluid Milk and Milk Products,
Number: 74-03. (Authorization No. 873).
Documents for manuals
Label Plate: 101A-1797

IP68 Report:

Certifier Body: CEPEL
Tests for Ingress Protection IP68 – CEPEL DVLA – 7390/05C
This report not apply to harzardous locations Ex d protection and with Drawing 101B-4740-00.
For guarantee the ingress of protection IP68 in the electrical connection input with NPT thread
must be applied a threadlocker like Loctite 262.
Documents for manuals:
Label Plate: 101A-8823
A.1

Publicidad

Tabla de contenido
loading

Tabla de contenido