Lubricating The Blade; Changing The Li-Ion Battery - Aesculap Suhl FAV5 CL/FORTIS Instrucciones De Manejo

12
2
Fig. 4
Fold forward blade 12, see Fig. 4.
Detach blade 12.
Clean open knife hinge with a brush.
Install blade 12 on knife hinge.
Plug in the power cord of battery-powered clipping
machine FAV5 CL/FORTIS.
Press ON/OFF switch 11.
Slightly push blade 12 towards battery-powered
clipping machine FAV5 CL/FORTIS.
Blade 12 will click into position.
Check that blade 12 is correctly seated on battery-
powered clipping machine FAV5 CL/FORTIS.

4.4.3 Lubricating the blade

Clean the upper and lower cutting plates with a
soft cloth or brush. Make certain that the gaps
between the cutting teeth are cleaned properly.
Slightly lubricate the upper and lower cutting
plates with special lubricant for blades GT604.

4.4.4 Changing the Li-ion battery

8
3
Fig. 5
Hold battery-powered clipping machine FAV5 CL/
FORTIS 2 and press battery release lock 3.
Pull out Li-ion battery 8 from battery-powered
clipping machine FAV5 CL/FORTIS 2.
Insert the charged Li-ion battery 8 in battery-pow-
ered clipping machine FAV5 CL/FORTIS 2 as far as
it will go.
The battery-powered clipping machine FAV5 CL/
FORTIS 2 is ready for operation.
2
3
9