Pioneer Super Tuner III D DEH-P5200HD Manual De Instrucciones página 23

Additional Information
Message Cause
SKIPPED The connected
USB storage de-
vice contains
WMA files em-
bedded with
Windows Med-
iaä DRM 9/10
PROTECT All the files in the
USB storage de-
vice are em-
bedded with
Windows Media
DRM 9/10
N/A USB
The USB storage
device connected
to is not sup-
ported by this
unit.
Not compatible
USB device
CHECK USB
The USB connec-
tor or USB cable
has short-
circuited.
The connected
USB storage de-
vice consumes
more than 500
mA (maximum
allowable cur-
rent).
ERROR-19 Communication
failure
Action
Play an audio file
not embedded with
Windows Media
DRM 9/10.
Transfer audio files
not embedded with
Windows Media
DRM 9/10 to the
USB storage de-
vice and connect.
Connect a USB
Mass Storage
Class compliant
device.
Disconnect your
device and replace
it with a compati-
ble USB storage
device.
Check that the
USB connector or
USB cable is not
caught in some-
thing or damaged.
Disconnect the
USB storage de-
vice and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect only com-
pliant USB storage
devices.
Perform one of the
following opera-
tions.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to the
USB source.
Message Cause
ERROR-23 USB storage de-
vice is not for-
matted with
FAT12, FAT16 or
FAT32
iPod
Message Cause
NO DEVICE
When plug and
play is off, no
USB storage de-
vice or iPod is
connected.
Format read There is some-
times a delay be-
tween the start of
playback and
when you start to
hear any sound
ERROR-19
Communication
failure
iPod failure
ERROR-16 Old iPod firm-
ware versions
iPod failure
N/A USB Not compatible
iPod
Appendix
Action
USB storage de-
vice should be for-
matted with FAT12,
FAT16 or FAT32.
Action
! Turn the plug
and play on.
! Connect a com-
patible iPod.
Wait until the mes-
sage disappears
and you hear
sound.
Disconnect the
cable from iPod.
Once iPod's main
menu is displayed,
reconnect cable.
Reset the iPod.
Disconnect the
cable from iPod.
Once iPod's main
menu is displayed,
reconnect cable.
Reset the iPod.
Update the iPod
version.
Disconnect the
cable from iPod.
Once iPod's main
menu is displayed,
reconnect cable.
Reset the iPod.
Disconnect your
device and replace
it with a compati-
ble iPod.
23
En