Electrical Connections - Erreka NTS324E Manual Del Instalador

9

ELECTRICAL CONNECTIONS

 Complete the installation in line with low voltage regulations and applicable rules.

Use cables with sufficient section, always earthed.

Check the manufacturer's instructions for all the elements installed.
NTS 324E, NTS 424E, NTS 624E:
NTS 324EM, NTS 424EM, NTS 624EM:
A.T
Total opening key command
SG.C
Closing safety device (mechanical strip or
photocell)
FT
Output 24Vdc for photocells (cable
connectors 6 and 7)
AUX
Output 24Vdc (cable connectors 7 and 8)
DEST
Flashing light (max. 60W)
LG
Garage light (max. 2,300W resistive)
ANT
Antenna connection
F1
Main fuse
R.E
Plug-in receiver
230Vac/ 50Hz
125Vac/ 60Hz
BAT: (2x12V)
BATTERY
IN/OUT
TRAFO Transformer (supplied installed and
connected)
A
Operator (supplied installed and
connected)
BAT
24V Batteries (2 x 12V)
CHG
External battery charger
SMF
Traffic light card AEPS1-001
STOP
Release switch (supplied installed and
connected)
SCA
SCA light (24Vdc)
INSTALLATION
CHG
NET barriers
57