Remote Control - Saivod VT-90 Manual De Instrucciones

Ventilador de torre
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION: THIS FAN MUST OPERATE IN THE UPRIGHT POSITION ONLY. DO NOT LAY
FAN ON ITS SIDE OR IN ANY OTHER POSITION. DOING SO MAY CAUSE DAMAGE TO THE
FAN AND/OR PERSONAL PROPERTY. DO NOT USE THIS FAN WITHOUT ITS BASE.
HOW TO USE
1.Remove the cable tie and unravel the cord set before operation.
2.DO NOT use outdoors.
3: Use the stop button to choose a fixed airflow direction for personal comfort or the
oscillating function (if featured) for larger areas.
4: Plug fan into a 220-240v, 50-60Hz outlet and follow the operating instructions:
The control panel and the remote of this fan are equipped with an LCD display and 6
functions (Power, Speed, Oscillation, Timer+, Timer- and Mode). For your convenience,
the buttons on the remote are designed to function in the same way as the keys on the
control panel. The LCD display has lights that illuminate to indicate the fan's active
functions.

REMOTE CONTROL

On/Off: Press this button to power the fan ON. When the fan is ON, the
power light on the LCD display will be illuminated. Once the fan is ON,
you may proceed to set the following functions. To power OFF, press this
button again.
Osc: To activate the oscillation function for widespread breeze
distribution, simply press this button. To turn off the oscillation function
for a targeted breeze setting, press the button again.
Timer+: This button sets the duration of operation before the fan
automatically turns OFF. Pressing this button will increase the time of
operation in 1 hour increments to a maximum of 12 hours. The total time
selected is indicted by the light(s) illuminating at 1H, 2H, 3H and 4H
spots on the LCD display.
Timer-: This button sets the duration of operation before the fan
automatically turns OFF. Pressing this button will decrease the time of
operation in 12 hours to a minimum of 1 hour. The total time selected is
indicted by the light(s) illuminating at 1H, 2H, 3H and 4H spots on the
LCD display.
Speed: Choose from 3 comfort settings (HIGH, MED, LOW) by pressing
this button until the speed you want is indicated on the LCD display.
Mode: Choose from 3 different breeze patterns (Sleep, Nature, Normal)
by pressing this button until the type of breeze desired is indicated on the
LCD display.
18

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido