Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Term. n.
16 (+
)
open
M1
17
(-
)
open
18 (-)
ENC
19 (+)
1
20 (D)
21 (+
)
open
M2
22
(-
)
open
23 (-)
ENC
24 (+)
2
25 (D)
26 (no)
US1
27 (nc)
28 (c)
24V
29 (+)
30
12V
31 (+)
32
33 (+)
34
24V
24V
35 (+)
36
24V FT
37 (+)
38
24V
39 (+)
40
41 Calza
42 Cent.
Function / Device
Output motor M1
Encoder sensor input motor M1
Output motor M2
Encoder sensor input motor M2
Contact for selectable functions
Uscita per spia di segnalazione
allarmi
Alarm indicator light output
WARNING LAMP output
Output for auxiliary device power
supply
Output for Transmitter / Photocell
power supply
Indicator light output
Receiver aerial input
V/I max
Motor M1 moves first in the opening direction and is
delayed during closing.
/
24/5A
An eventual electric lock should be fitted to this gate
leaf.
/
This device will be detected if it is present during
5-12V
/
programming, otherwise it will be excluded.
M2 is the second motor to move and the first one to
/
24/5A
close.
/
This device will be detected if it is present during
5-12V
/
programming, otherwise it will be excluded.
/
Potential free contact.
/4A
See settings for dip 7 (part. 19 fig. A)
3 flashes indicate "obstacle detected"
4 flashes indicate "encoder not present"
24dc/
/
0,2
A
5 flashes indicate "motor control failure"
6 flashes indicate "maintenance alarm"
12dc/1,5A
/
Attiva per qualche secondo ad ogni inizio apertura.
Output active while the motor is working
/
24Vdc/1A
With DIP 5 (part. 19 fig. A) ON, the warning-light
lights up 5 s before the motor begins to move.
e.g. photocells, external receivers or other 24Vac
24dc/0,5A
/
devices
Output only active during the manoeuvre and the
/
reclosing pause period, connect the photoelectric
24dc/
0,5
A
cell projectors so that the minimum amount of
power is used. If the jumper (part. 9 di fig. A) is set
to ON this output will be continuously active.
Status indication:
automation CLOSED – led off
/
during OPENING – flashes slowly
24dc/
0,2
A
during CLOSING – flashes quickly
STOP (block) – remains lit
during the RECLOSING PAUSE – double flashing
with pause
Antenna connection for the OC2 module (optional)
inserted into slot det. 12, fig. A.
/
Use an antenna with characteristics compatible with
the receiver.
GB
Notes
44
Publicidad
Tabla de contenido
