Enabling/Disabling The Auto Power Standby Function; Initializing The Unit - Yamaha YAS-106 Manual De Instrucciones

Enabling/disabling the auto power
standby function
Enabling the auto power standby function prevents the unit from
remaining on when not in use.
NOTE
• When the auto power standby function is enabled, the unit automatically turns off in
any of the following situations.
− No operations for 8 hours
− No audio input and no operations for 20 minutes when BLUETOOTH or HDMI is
selected as the input source.
1
Turn off the unit.
2
Hold down the key and press the
unit.
The auto power standby function is enabled or disabled, and the
unit turns on. For several seconds immediately after the unit is
turned on, the indicator shows auto power standby function
status.
Off (enabled), glows (disabled; default)

Initializing the unit

Follow the procedure below to initialize the unit.
1
Turn off the unit.
2
Hold down the
same time until all indicators flash.
key on the
and keys on the unit at the
Flash (initialized)
27
En