Accessories; Standard Accessories; Optional Accessories - Hitachi H 90SG Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
WARNING:
Accessories for this power tool are mentioned in this Instruction Manual.
The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.
NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1) Allen Wrench (for 6 mm bolt) (Code No. 944459) ................................................................................................... 1
(2) Side Handle (Code No. 337059) ................................................................................................................................ 1
(3) Bolt M6 × 30 (for Side Handle) (Code No. 993496) ................................................................................................. 4
OPTIONAL ACCESSORIES..........sold separately
(1) Bull Point...for demolitioning
Overall Length
16-9/64" (410 mm)
20-15/32" (520 mm)
(2) Cold chisel...for groove digging and edging
Overall Length
20-15/32" (520 mm)
(3) Cutter...for asphalt + cutting
Overall Length
20-15/32" (520 mm)
(4) Scoop...for scooping work
Overall Length
21-1/2" (546 mm)
12

ACCESSORIES

Code No.
996372
985230
Code No.
985231
Code No.
985232
Code No.
985233
(5) Rammer and Shank...for tamping
Rammer
Rammer
Outer Diameter
7-7/8" (200 mm)
Shank (for Rammer)
Overall Length
15-35/64" (395 mm)
(6) Hammer Grease A
1.1 lbs (500 g) (in a can) (Code No. 980927)
NOTE:
Specifications are subject to change without any
obligation on the part of the HITACHI.
Shank (for Rammer)
Code No.
305880
Code No.
308092

Publicidad

Tabla de contenido
loading

Tabla de contenido