Operating - Medisana IRL Instrucciones De Manejo

3.1
Application
area of the
MEDISANA IRL
infrared lamp
3.2
Operation
Therapeutic treatment
The MEDISANA IRL infrared lamp supports domestic therapy and can ac-
company medical treatment given by a doctor, such as:
• Colds (always consult a doctor if you have a high temperature).
• Tension
• Cramps
• Muscular pain
• Rheumatic complaints
• Treatment of ear, nose and throat complaints
Cosmetic treatment
• The MEDISANA IRL infrared lamp is suitable for assisting facial and
beauty care, particularly in the case of bad skin.
- Remove all traces of make-up before treatment.
- The effect of the infrared radiation opens up the pores in the skin.
- This results in better and more effective cleaning of the skin.
- Creams and other cosmetic substances are absorbed more intensively
and quickly by the skin.
No side-effects are known for the treatments mentioned in these usage
instructions, provided that all of the safety instructions are followed (see
pages 9 – 11). If you do not see an improvement after several treatments,
please contact a doctor.
In all other cases that are not mentioned here, infrared radiation therapy
must not be carried out before consulting a doctor.
• Please follow the safety instructions.
• Check the connecting cable
• Place the device on its base
• The infrared bulb
• The device has an adjustable lamp housing
45 ° allow the device to be individually positioned in accordance with
requirements.
• In order to prevent burns, always grip the lamp housing
if you wish to change the position.
• Plug the device into the mains and radiation will start up immediately.
The effect of radiation is at its highest the nearer you are to the lamp.
However, please operate the device at a distance at which the heat feels
comfortable, but no nearer than 80 cm. Increase the distance if the heat
feels uncomfortable.
• Adjust the length of the session according to your personal level of sensiti-
vity, however this should not exceed 15 minutes per session.
• Unplug the device from the mains when treatment has been completed.
.
on a firm, level surface.
must be firmly screwed in.

3 Operating

. The 4 settings from 0 ° to
from behind
GB
13