Machine Backpack Harness; Machine Operation - Tennant V-BP-6 Serie Manual De Operación

EN English

MACHINE BACKPACK HARNESS

To Properly Mount Machine on Back:
1. Fully loosen all harness straps.
2. Place the machine on your back so the weight of
the machine is resting on your hips. Fasten the hip
belt and pull belt straps forward to tighten (A).
3. Pull the two shoulder straps downward to pull the
machine towards your back (B).
4. Connect the front shoulder straps together (C).
5. For final adjustment, pull the two stabilizer shoulder
straps as needed to balance the weight of machine
(D).
A
C
6. If the weight of the machine is not resting on your
hips, adjust the shoulder harness height adjuster to
your back length. It's important to ensure machine
weight is resting on your hips to prevent shoulder
fatigue.
8
B
D

MACHINE OPERATION

1. Plug the power cord into grounded electrical outlet.
Always unwind power cord completely before
operating machine.
2. Press the on/off switch to the on position.
3. Begin cleaning the area by working away from the
electrical outlet. Keep back straight while cleaning
to prevent back fatigue.
4. Operate the two- bend wand with a forward and
backward motion.
For models equipped with the straight wand and
Sidewinder tool, hold the wand parallel to your
body and pivot your waist while walking (a side to
side mopping motion). This motion keeps the upper
body and arms from tiring.
Tennant V- BP- 6, V- BP- 10 (01- 2015)
Sidewinder
Tool