Manual Settings - TFA Dostmann 60.2530.02 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
TFA_No. 60.2530_anl_08_17
Radio-controlled alarm clock
• During night-time, the atmospheric interference is usually less severe and reception is
possible in most cases. A single daily reception is adequate to keep the accuracy devia-
tion under 1 second.
4. Operation

4.1 Manual settings

• Press and hold the TIME SET button in normal mode for three seconds.
• RCC appears on the display and ON (default) will be flashing. By default, the DCF
reception is activated and after successful reception of the DCF signal no manual
adjustment is necessary.
• Press the ▲ or ▼ button if you want to deactivate the DCF reception (OFF).
• Confirm the setting with the TIME SET button.
• Press the TIME SET button to make the settings in the following sequence: The 12 or
24 hours system (24Hr - default), Time zone TZ (0 - default), the hours, the minutes, the
year, the month, the day and the language of the day of the week (GER - default), the
temperature unit (°C - default). Press the ▲ or ▼ button to adjust it.
• By a successful reception of the DCF signal and if the DCF reception is activated, the
manually set time will be overwritten.
18
03.08.2017
14:24 Uhr
Seite 10
Radio-controlled alarm clock
4.2 Setting of the 12 and 24 hours display
• Press the ▲ or ▼ button in the setting mode to choose the 12 HR or 24 HR system.
• In 12 HR system PM appears after 12 h on the display.
4.3 Setting of the time zone
• In the setting mode you can make the time zone correction (-12/+12).
• The time zone correction is needed for countries where the DCF signal can be received
but the time zone is different from the German time (e.g. +1=one hour later).
4.4 Setting of the day-of-week language
• In the setting mode you can make the setting of the day-of-the week language: German
(GER), English (ENG), French (FRE), Spanish (SPA), Dutch (DUT), Italian (ITA), Polish
(POL) and Czech (CZE).
4.5 Setting of the temperature unit
• In the setting mode you can change between °C (Celsius) or °F (Fahrenheit) as temper-
ature unit.
19

Publicidad

Tabla de contenido
loading

Tabla de contenido