Cleaning The Nozzles - Bosch BBS61 Instrucciones De Uso

en Cleaning and servicing
Insert the filter unit into the dust
10.
container.
→ Fig.
18
Insert the dust container.
11.
a The dust container audibly clicks
into position.

Cleaning the nozzles

Requirement: "The appliance is
switched off." → Page 36
Disconnect the nozzle from the ap-
1.
pliance.
Release the brush roller.
2.
→ Fig.
24
Remove the brush roller sideways
3.
from the nozzle.
Use scissors to cut through
4.
threads and hairs along the
1
bristles or cut through the cutting
1
groove .
→ Fig.
25
Insert the brush roller sideways
5.
along the guide bar and into the
nozzle.
→ Fig.
26
Lock the brush roller.
6.
Note: The brush roller is self-clean-
ing. When operating the brush roller
on carpet, your appliance automatic-
ally vacuums the cut threads and
hairs after more than 30 seconds.
1
Depending on the appliance specifications
38