Unpacking The Washer; Tools You Will Need - Sears Kenmore Elite 796.2927 Serie Manual De Uso

I I
UNPACKING THE WASHER
When removing the washer from the carton base, be sure the
plastic tub support comes off with the base.
If you must lay the washer down to remove the base
packaging materials, always protect the side of the washer and
lay it carefully on its side. DO NOT lay the washer on its front
or back.
i t
Tub support Carton Base
1. After removing the carton and shipping material, lift the
washer off the foam base. Make sure the plastic tub
support comes off with the base and is not stuck to the
bottom of the washer.
2. Remove the packing block containing the owner's manual,
parts, water hoses, and laundry product samples.
NOTE: Do not remove the foam block until the washer is at
the final location.
3. Unfasten the power cord from the back of the washer.
TOOLS YOU WILL NEED
• Adjustable Pliers
• Carpenter's Level
8
I I