Safety Instructions - DiniTech NRGkick Manual De Instrucciones

3. Safety Instructions

Warning!
Not following the safety instructions could result in a risk to life or of injury, as well as damage to the unit.
DiniTech GmbH disclaims all liability for claims resulting from not following the safety instructions.
Electrical Hazard! Fire Hazard!
Never use worn, damaged or dirty charge connectors, grid connectors or adapter plugs!
The electrical system to which the charging unit is connected and on which it runs must be inspected by a
qualified electrician. The current circuit of the socket that will be used for charging must have its own
residual current protective unit and a circuit breaker. Only use properly installed, undamaged sockets and
an electrical system that is in perfect working order for charging.
On unknown sockets the vehicle charging current must be set to the lowest current value!
The owner (end customer) must make sure the charging unit is always in immaculate condition when in
operation!
The charging unit must be regularly inspected for damage to the housing, the charging connector and the
grid connector (visual check)!
If the charging unit is damaged, it must be disconnected from the grid immediately. The damaged unit
must not be connected to the power grid again and must be replaced!
Repairs may not be carried out on the charging unit. Repairs may only be carried out by the manufacturer
(replacement of the charging unit)!
Do not make any unauthorized modifications to the charging unit!
Contacts must not be oiled, greased or treated with contact spray!
Do not remove labels such as the rating plate, warning notices, current limit marks or display symbols!
EN
Never disconnect the power grid connector while charging is in progress! Before stopping the charging
process, first unplug the charging connector from the vehicle and then unplug the grid connector.
Always follow the correct sequence when connecting plugs!
Additional extension cables may not be used for connection to the power grid as well as to the vehicle!
The charging unit and all included accessories must only be used to charge the drive battery of electric or
plug-in-hybrid vehicles. The unit may not be used with different types of loads (improper use)!
Read the information and instructions for your vehicle carefully before you charge the vehicle using the
charging unit!
Before charging the vehicle, make sure that it is sufficiently secured against rolling away!
Do not run the charging unit in a thermally insulated or encapsulated vessel or container
due to the risk of overheating.
Ver.: 1810-11 3