Cleaning Spouts And Screens - Toto Kiwami Renesse TB170DD Manual De Instrucciones Y Del Propietario

CLeaning sPoUT anD sCReens
If slightly dirty, use water and a damp cloth to wipe away the dirt
completely. If especially dirty, use cloth with dilute detergent to wipe away
the dirt, then rinse and dry it.
Do noT use acidic cleaning agents, alkaline cleaning agents, bleaches,
thinner, benzenes, cleanser, grinding powder, nylon scrubbers, or brushes.
1. Use spout key to remove
face plate adapter.
noTe: Be careful not
to cause scratches while
unscrewing the adapter.
2. Carefully take out the
screens and clean them with
a clean brush.
3. Put the o-ring, screens and
adapter back in place on
the spout.
Spout
O-ring
Screens
Face plate adapter
Loosen it
Brush
6
Spout key
Disassembly of spout and
screens for cleaning
Screen