Tabla De Contenido; Thanks For Choosing Toto; Warnings; Tools You Will Need - Toto TSST Manual De Instrucciones Y Del Propietario

TABLE OF CONTENTS
Thanks for Choosing TOTO ! ............................................................................ 2
®
Warnings .............................................................................................................. 2
Tools You Will Need ............................................................................................ 3
Before Installation ............................................................................................... 3
Care and Cleaning .............................................................................................. 3
Installation Procedure ......................................................................................... 4
Calibration Procedure ........................................................................................ 5
Accessing and Cleaning the Valves ................................................................... 6
Warranty ............................................................................................................... 7
Rough-In Dimensions ........................................................................................ 20
Troubleshooting ................................................................................................ 21
Spare Parts ........................................................................................................ 22

THANKS FOR CHOOSING TOTO!

The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.

WARNINGS

„ RISK OF SCALDING: This valve must be calibrated by the installer (see
valve calibration procedure on page 5). Once calibrated, this valve has a
limiter to prevent the temperature from exceeding 120ºF (49°C).
„ If you are soldering during installation, do not apply excessive heat to
the valve body. Excessive heat may damage the internal seals and plastic
components.
„ Please do not use this valve if there is a large difference in the pressure
between the hot and cold water supplies.
„ Hot water supply temperature should not exceed 140°F (60°C).
„ Do not use this valve at an ambient temperature below 32°F (0°C).
„ Do not reverse the hot and cold water inlets.
„ Insulate the hot water supply pipe to minimize heat loss.
„ Do not use steam for the hot water supply.
„ Do not disassemble the thermostatic cartridge.
2

TOOLS YOU WILL NEED

120°
70°
10°
Pipe Tape Thermometer
BEFORE YOU START INSTALLATION
„ Observe all local plumbing codes.
„ Flush all piping thoroughly before installing the valve.
„ Make sure the water supply is shut off.
„ Read these instructions carefully to ensure proper installation.
„ TOTO reserves the right to update product design without notice.
®
„ Check to make sure you have the following parts indicated below:
Plaster
Guard
CARE & CLEANING
Your new valve is designed for years of trouble-free performance. keep it
looking new by cleaning it periodically with mild soap, rinsing thoroughly
with warm water and drying with a clean, soft cloth. Do not use abrasive
cleaners, steel wool or harsh chemicals, as these will dull the finish. Failure to
follow these instructions may void your warranty.
Screwdriver
Adjustable Adjustable
Pliers Wrench
Valve
3