Care And Cleaning; Troubleshooting; Specifications - Toto Neorest II LLT993 Manual Del Propietrario

„ Wipe the bowl with a soft cloth and warm soapy water or a mild cleaning
detergent. Dry the bowl with a soft clean cloth.
„ Clean oily dirt, residue, etc. off the bowl with a soft cloth and ethyl alcohol.
„ Regularly drying the upper face of the bowl will help maintain the appear-
ance of the lavatory.
„ To remove a clog in the drain, gently pull the drain cover
up and out to access the drain and remove the clog.
Please read this section to see if you can troubleshoot the problem before
requesting a repair. If you still cannot solve the problem after reviewing this
section, please contact TOTO® (see the last page of this manual for contact
information).
Problem - The bowl does not light up.
Tests and Results
Has the LED connector been connected
to the power adapter connector?
Has the switch on the power adapter
been turned on?
Has the wall switch been turned on?
Is the circuit breaker thrown?
Is the wiring or LED damaged?
Problem - The light of the bowl is faded.
Tests and Results
Is the LED faded due to product lifespan?
(The lifespan is approximately 25,000
hours and the brightness drops by 70%.)
Item
Bowl
LED Lighting
Optional Accessory
Power Supply Unit

CARE AND CLEANING

TROUBLESHOOTING

• Make the proper wiring connections.
• Turn the switch to the on position.
• Have a professional verify that the wall outlet
works.
• Check that the circuit breaker is not thrown.
• Replace any damaged parts.
• Replace the LED with a new one.
(See pg. 4 in the manual)

SPECIFICATIONS

Name
Dimensions
Weight
Material
Input Voltage
Current
Input Voltage
Frequency
Output Voltage
5
Drain
Solutions
Solutions
Specification
750 x 450 x 50 mm
13 lbs (6 kg)
Epoxy Resin
DC 12V
0.1 A
AC 100-240 V
50/60 Hz
DC 12 V