auna Connect 100 Manual Del Usuario página 60

EN
60
The first two alarms are similar to the normal alarm, turn it on and then set
the time. You can choose between every day, once or on any particular day
of the week. Select „Sound" to set the sound to beep, melody or Internet
radio.
Note that if the alarm sound is set to Internet radio, the alarm source is the
default Internet radio station. Only the same Internet radio station can be
selected for Alarm 1 and Alarm 2 together. When the alarm time is reached,
the unit connects to the Internet if the set network is available. Therefore,
there may be some delay between the alarm and radio playback. If no
network connection can be established within one minute, the alarm will
automatically change to melody.
After the NAP alarm is set, it will sound once after 5/10/20/30/60/90/120
minutes, depending on the time period you set.
You can select the alarm volume to configure the volume of the alarms.
When the alarm(s) is (are) set, a clock symbol appears at the top of the
display. The clock icon with the alarm time is also clearly displayed on the
idle screen.
During the alarm, press any button (except the POWER button) on the
device/remote control or ALARM on the remote control to enter snooze
mode. The alarm will then sound again after 5 minutes. Then press the
POWER button or press ALARM on the remote control to stop the alarm
and go to the alarm setting.
Timer
• To set the countdown: In standby mode, the timer function is off or/and
stop the timer countdown.
• To set the timer: Press [<] to decrease the time (from 99:59 to 00:00) or
press [>] to increase the time (from 00:00 to 9 9:59). Then press OK to
confirm, the time will count down.
• Press HOME/MODE to return to the playback screen.