Fein GRIT GIXS Manual De Instrucciones página 8

OBJ_BUCH-0000000316-001.book Page 8 Thursday, June 21, 2018 10:41 AM
en
8
en Original Instructions.
Symbols, abbreviations and terms used.
The symbols in the Instruction Manual and on the machine shall aide in directing your attention to possible hazardous
situations when working with this machine.
Symbol, character Explanation
Do not touch the rotating parts of the machine.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the General Safety
Instructions.
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
may be danger of injury caused by unintentional starting of the machine.
Use eye protection during operation.
Use ear protection during operation.
Use a dust mask during operation.
Use protective gloves during operation.
Danger warning
Confirms the conformity of the power tool with the directives of the European Community.
Worn out machine and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
3~ Mains supply: three-phase alternating current
/I Product with basic insulation plus additional insulation on touchable, conductive parts connected
to the protective conductor.
(**) may contain numbers and letters
Character Unit of measurement,
international
n /min, min
r/min
P
W
1
U
V
f
Hz
3
m /h
hPa
kg
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
For your safety.
Do not use this sub base before you have thor-
oughly read and completely understood these
operating instructions, including the figures, speci-
fications, and safety regulations.
Read and observe the operating instructions of the
machine, which is to be mounted to this sub base.
Unit of measurement,
national
-1
, rpm, rpm
W
V
Hz
3
m /h
hPa
kg
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
Explanation
Fan speed
Power input
Rated voltage
Frequency
Flow rate
Vacuum
Weight according to EPTA-Procedure 01
Basic and derived units of measurement from
the international system of units SI.
Please also observe the relevant national regulations on
electrical safety and occupational safety.
Non-observance of the safety instructions in the said
documentation can lead to an electric shock, burns
and/or severe injuries.
These operating instructions should be kept for later use
and enclosed with the device, should it be passed on or
sold.