FujiFilm XF200mmF2 R LM OIS WR Manual Del Propietário página 25

Using the Lens Case
Reverse and attach the
1
hood, keeping tripod
collar foot aligned with
the hood lock knob.
Insert the assembly with
2
the bottom of the tripod
collar foot in a corner of
the case.
Q Be sure to attach the lens caps before putting the lens
in the case.
Q Fit the assembly into the hollows inside the case.
Fit the deepest hollow in
3
the cushion over the lens
cap.
Q Ensure that the cushion fi ts snugly with no gaps.
Q Be sure to use the cushion even if the teleconverter is not
inserted.
Insert the teleconverter
4
with its rear cap in the
hollow in the cushion
and cover it with the net.
R The lens can be inserted with the teleconverter attached.
ENGLISH EN-10