TFA_No. 60.2028_Anleitung_06_20
CHARGE-IT WIRELESS – Wireless charging alarm clock
Thank you for choosing this instrument from TFA.
1. Before you use this product
• Please make sure you read the instruction manual carefully.
This information will help you to familiarize yourself with your new device, to learn all of its
functions and parts, to find out important details about its first use and how to operate it and to
get advice in the event of a malfunction.
• Following and respecting the instructions in your manual will prevent damage to your instru-
ment and loss of your statutory rights arising from defects due to incorrect use.
• Likewise, we take no responsibility for any incorrect readings or for any consequences
resulting from them.
• We shall not be liable for any damage occurring as a result of non-following of these instruc-
tions.
• Please take particular note of the safety advice!
• Please keep this instruction manual safe for future reference.
2. Delivery contents
• Digital alarm clock
• Power adaptor
• Instruction manual
3. Range of application and all the benefits of your new instrument at a glance
• Inductive charging station (according to Qi standard) and USB charging function for mobile
devices
• Colour display with 4 brightness levels and automatic dimming function
• Indication of time, date with weekday written in full letters and room temperature
• Alarm with rising alarm tone
• Snooze function with adjustable interval (5 to 120 minutes)
• Mood light with automatic colour change or direct colour selection (red, yellow, green, cyan,
dark blue, purple, white) in 4 brightness levels
• Non-slip stand with 4 rubber pads
14
05.06.2020
11:13 Uhr
Seite 8
CHARGE-IT WIRELESS – Wireless charging alarm clock
4. For your safety
• This product is exclusively intended for the range of application described above. It should only
be used as described within these instructions.
• Unauthorized repairs, alterations or changes to the product are prohibited.
Caution!
Risk of electrocution!
• Plug the device only into a mains socket installed within your country's electrical safety regula-
tions and with a correct mains voltage (see nameplate).
• The mains socket must be located near the equipment and it must be easily accessible.
• Unplug the device immediately if any fault occurs.
• The device and the power adapter must not come into contact with water or moisture. Only suit-
able for indoor use.
• Do not use the device if the housing or the power adapter are damaged.
• Keep the device out of reach of persons (including children) who cannot fully appreciate the
potential risks of handling electrical equipment.
• Only use the supplied power adapter.
• Connect the lead to the device first and then plug the power adapter into the socket.
• Do not pull the plug out of the socket by its cable.
• Route the mains cable so it does not come into contact with sharp-edged or hot objects.
Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or shocks.
• Protect it from moisture!
• Protect the device from overheating when charging and provide sufficient ventilation. Make sure
that the device is placed on a solid, clean surface. Do not place the device on cloth, carpet,
paper or other objects that could obstruct the ventilation. Remove dust or other obstacles from
the ventilation slots on the bottom of the unit.
• Do not place any other objects on the charging pad.
• Do not apply excessive force when connecting a USB cable. The USB plug fits only one way into
the USB port.
15