TFA Dostmann PRIO Instrucciones De Uso página 11

TFA_No. 30.3069_Anleitung
PRIO – Wireless Thermometer
• This product should only be used as described within these
instructions.
• Unauthorized repairs, alterations or changes to the product are
prohibited.
Caution!
Risk of injury!
• Keep these devices and the batteries out of reach of children.
• Batteries contain harmful acids and may be hazardous if swal-
lowed. If a battery is swallowed, this can lead to serious internal
burns and death within two hours. If you suspect a battery
could have been swallowed or otherwise caught in the body,
seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken
apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent
damage caused by leaking. Never use a combination of old and
new batteries together, nor batteries of different types.
• Wear chemical-resistant protective gloves and safety glasses
when handling leaking batteries.
Important information on product safety!
• Do not expose the devices to extreme temperatures, vibrations
or shocks.
• The outdoor transmitter is splashproof, but not watertight.
When placed outdoors, choose a dry place for the transmitter.
5. Elements
5.1 Base station (Receiver)
A: Display (Fig. 1):
A 1: Outdoor temperature
20
21.04.2020 15:00 Uhr Seite 11
PRIO – Wireless Thermometer
A 2: Reception symbol for the transmitter
A 3: Battery symbol for the transmitter
A 4: Trend arrow
A 5: Battery symbol for the base station
A 6: Indoor humidity
A 7: Indoor temperature
A 8: Seconds or AM/PM
A 9: Weekday and date
A 10: Time or alarm time
A 11: Alarm symbol
A 12: DCF reception symbol
A 13: Minimum value/lower alarm limit
A 14: Temperature alarm symbol
A 15: Maximum value/upper alarm limit
B: Buttons (Fig. 1 + 2):
B 1: MAX/MIN button
B 2: SET button
B 3: TEMP ALARM button
B 4: TIME ALARM button
B 5: + button
B 6: – button
C: Housing (Fig. 2):
C 1: Battery compartment
C 2: Stand
5.2 Transmitter (Fig. 3):
D 1: LED signal lamp
D 2: TX button
D 3: Battery compartment
D 4: Mounting hole
21