Operation Tips; Maintenance; General Maintenance; Replace The Scraper - GreenWorks Pro 060-0799-6 Manual Del Operador

EN
7.7

OPERATION TIPS

• If it is possible, clear the snow with the direction of
the wind.
• In strong winds, lower the chute deflector to direct
the snow to the ground.
• When you complete the work, let the machine
operate for a while to prevent ice formation in the
discharge chute.
• If the snow is deeper than 8", decrease the speed
and let the machine work at its own rhythm.
• Do not use the scraper to remove compact snow
and ice.
8

MAINTENANCE

Remove the battery pack from the machine before
maintenance.
Use only approved replacement parts.
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can cause
damage to the plastic, and make the plastic
unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
8.1

GENERAL MAINTENANCE

• Before each use, examine the machine for
damaged, missing, or loose parts such as screws,
nuts, bolts and caps.
• Tighten correctly all the fasteners and caps.
• Clean the remaining snow on the machine with a
brush.
WARNING
CAUTION
CAUTION
CAUTION
English
8.2

REPLACE THE SCRAPER

Use only approved replacement scrapers.
Wear heavy gloves or wind cloth around the blade
when you touch the blade.
1. Remove the screws(1) from each side plate.
2. Remove the mounting screws (2) and spacers and
discard the old scraper.
3. Install the new scraper.
4. Reinstall the mounting screws (2) and spacers and
tighten them.
8.3

REPLACE THE IMPELLER

Use only approved replacement scrapers.
1. Remove the 5 screws(1) and side wear pad(2) that
secure the right side cover.
10
1
2
1
WARNING
WARNING
WARNING