Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
8.4
ADJUST THE DISCHARGE CHUTE
You can adjust the discharge chute 180° to change the snow
direction.
1. Push the chute-rotation handle (4) forward to move the
discharge chute (7) to the left.
2. Push the chute-rotation handle (4) rearward to move the
discharge chute (7) to the right.
8.5
ADJUST THE CHUTE DEFLECTOR
You can adjust the chute deflector up and down to change the
throwing distance of the snow.
English
7
4
22
6
Release the bail switch before you adjust the chute
deflector.
Do not push the deflector so far forward that a gap shows
between the deflector and the chute.
1. Push and hold the trigger (22) on the chute deflector (6).
2. Move the chute deflector (6) up to increase the snow
distance.
3. Move the chute deflector (6) down to decrease the snow
distance.
8.6
OPERATION TIPS
•
If it is possible, clear the snow with the direction of the
wind.
•
In strong winds, lower the chute deflector to direct the
snow to the ground.
•
When you complete the work, let the machine operate for
a while to prevent ice formation in the discharge chute.
•
If the snow is deeper than 8", decrease the speed and let
the machine work at its own rhythm.
•
Do not use the scraper to remove compact snow and ice.
9
MAINTENANCE
Remove the battery pack from the machine before
maintenance.
Use only approved replacement parts.
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
9.1
GENERAL MAINTENANCE
•
Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
caps.
•
Tighten all the fasteners and caps correctly.
•
Clean the remaining snow on the machine with a brush.
10
WARNING
WARNING
WARNING
CAUTION
CAUTION
CAUTION
Publicidad
Tabla de contenido
