Installation Area - Corghi HD 1300 Manual De Uso

Gripping the various projecting parts of the
structure in a manner not recommended here is
absolutely forbidden.
When moving it after installation, position the
machine as shown in Fig. 6 to guarantee that
the load is correctly balanced.
If necessary, disconnect the electrohydraulic
power unit.

INSTALLATION AREA

FOR RADIO VERSIONS ONLY:
Before starting with installation, make sure that no machines working with the same
frequency band are located within a radius of 200m from the selected installation spot.
In the case of interference, request a different frequency band.
When choosing the installation spot it is necessary to respect the current regulations
on safety at work.
The machine must be installed on a stable and
rigid floor to prevent and avoid any structure
deformation.
Position the machine in a manner that guarantees
access to all four sides. In particular, check the
minimum space required for the work indicated
in Fig. 7:
- at the front for wheel loading and unloading;
- at the rear to be able to view the work being
performed.
If the machine is to be installed outdoors, it must be properly protected from ad-
verse weather by a roof.
82
WARNING
CAUTION!
CAUTION!
CAUTION!
HD 1300 / HD 1300 A Operator Manual
1500
1000
6
7