Quick-Start; Quick-Start In Manual Operation - Enraf Nonius Crosswalker Instrucciones De Manejo

8 Quick-start

8.1

Quick-start in manual operation

With the quick-start function you can start training immediately. Proceed as follows:
6
7
8
9
1
Fig. 3. Exercise options
6
7
8
9
1
Fig. 4 Activating the quick-start
6
7
8
9
1
Fig. 5. Training results
3 2
3 2
3 2
First use the rotary button (3) to
select the desired exercise form
10
under Exercise (6).
The options are:
• Constant power
• Constant torque
4
• Constant pulse
In the Exercise screen illustrated,
'constant power' has been selected.
5
By pressing the green button (1) or
starting to walk you start the training
10
immediately in accordance with the
values that have been pre-set under
'settings'. In the section on the
'preferences menu' (Chapter 9) you
can read how these values can be
4
changed.
During the training you can see the
various parameters displayed on the
exercise screen. The power can be
adjusted with the rotary button (3).
5
These parameters can also be
adjusted when you training for torque
or heart rate.
Press the red stop button (2) if you
need to end a training session
prematurely.
After the training session is over or
has been prematurely terminated this
10
screen will show the results of the
session.
4
5
35