Setting The Correct Time; Preset Stations; Tape Operations - Roadstar RCR-3650UMP Manual De Instrucciones

FOLDER BUTTON (4) to change between ROCK / POP / CLASSIC / JAZZ.

SETTING THE CORRECT TIME

1. Connect the unit to the power supply. "00:00" will be shown on the display.
2. Press and hold M-/MODE/CLOCK BUTTON (5). 12/24 digits will flash on the display.
3. Press SKIP+/- BUTTON (2)/(3) repeatedly to select between 12 and 24. Press M-/
MODE/CLOCK BUTTON (5) again to confirm.
4. The hour digits will flash on the display. Press SKIP+/- BUTTON (2)/(3) repeatedly to set
the correct hour. Press M-/MODE/CLOCK BUTTON (5) again to confirm.
5. The minute digits will flash on the display. Press SKIP+/- BUTTON (2)/(3) repeatedly to
set the correct minute. Press M-/MODE/CLOCK BUTTON (5) again to confirm.
FM RADIO OPERATIONS
1. Press ON/OFF/FUNCTION BUTTON (16) to turn the unit ON. Press ON/OFF/
FUNCTION BUTTON (16) repeatedly to select FM mode. The current station frequency
will be shown on the display.
2. For FM reception there is a built in telescopic antenna. You may need to adjust the posi-
tion of the antenna to get optimum reception.
3. Select a station using one of the following methods:
Long pressing SKIP+/- BUTTON (2)/(3) for 2 seconds or more, the frequency changes

down or up automatically until a station is found.
Repeatedly press SKIP+/- BUTTON (2)/(3) to change the frequency until you find the

station you want.

PRESET STATIONS

You can program a maximum of 30 preset radio stations. Press M+/M- BUTTON (4)/(5) to
navigate through the stored presets.
Automatic Preset:
Press PLAY/PAUSE/SCAN BUTTON (6) for 2 seconds or more to activate automatic pro-
gram mode. All available stations are programmed. The first programmed radio station is
broadcast automatically.
Manual Preset
1. Repeatedly press SKIP+/- BUTTON (2)/(3) to change the frequency until you find the
station you want.
2. Press STOP/MEMO/SLEEP BUTTON (7). "P XX" will be shown on the display. Press
M+/M- BUTTON (4)/(5) to select the chosen preset number, from 1 to 30.
3. Press STOP/MEMO/SLEEP BUTTON (7) again to confirm.

TAPE OPERATIONS

1. Press ON/OFF/FUNCTION BUTTON (16) to turn the unit ON. Press ON/OFF/
FUNCTION BUTTON (16) repeatedly to select TAPE mode. The clock will be shown on
the display.
2. Press the STOP/EJ BUTTON (9) to open the cassette door and insert your tape. Close
the CASSETTE DOOR (19).
3. Press the PLAY BUTTON (12) to start playing tape.
4. Press FFD/REW (10)/(11) to start rapid tape winding either forward or reverse direction.
5. Press PLAY BUTTON (12) to start playing tape.
6. Press the PAUSE BUTTON (8) when you want to stop playing tape operation temporari-
English 2