Cleaning, Care & Maintenance - BOLERO CF129 Manual De Instrucciones

UK
Set the master code
Open the Safe with the master code:
1. Press "#" twice, the word "SUPER" will be
displayed.
2. Enter the master code, the default code is
"000000".
3. The word "OPENED" will be displayed and the
safe door will open.
To change the master code, the safe door must be
opened first.
1. The word "OPENED" is displayed, press "*"
twice, and "PROG" is displayed.
2. Input the current master code.
3. Press "#" and the word "CODE" is displayed
4. Enter a new 6-digit master code
5. Press "#" and "DONE" will be displayed first,
then the new master code will be displayed.
6. The word "GOOD" will be displayed to confirm
the new master code.
Cleaning, Care &
Maintenance
Remove the batteries if you will
not be using the appliance for
an extended period of time.
Compliance
Dispose of depleted batteries in accordance with local regulations, within the EC there
are nominated disposal points for batteries.
The WEEE logo on this product or its documentation indicates that the product must
not be disposed of as household waste. To help prevent possible harm to human
health and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of
this product correctly, contact the product supplier, or the local authority responsible for
waste disposal in your area.
BOLERO parts have undergone strict product testing in order to comply with regulatory
standards and specifications set by international, independent, and federal authorities.
BOLERO products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of BOLERO.
Every effort is made to ensure all details are correct at the time of going to press, however, BOLERO reserve the right to
4
CF129_ML_A5_v4_20190927.indb 4
• The exterior of the Safe can be cleaned by
wiping with a damp cloth.
• Dust or user debris can be brushed from the
interior, or removed using a vacuum cleaner.
Troubleshooting
If the master code is lost or forgotten, open
the safe with the key, remove the metal lock
cover(secured by four screws), then press the reset
button which is located on the PCB.
change specifications without notice.
2019/9/27 16:14