hafele 271.91.114 Instrucciones De Montaje página 19

GB
Bettlift with Cat. No.
271.91.135/136
X = Total height of
base panel and gap,
see Fig. 2 on page 6
2
Fig. 12
2 Raised-head screws
M4 x 12 mm for
adjusting the height
of the front panel
Preparing the front panel
max. 1454 mm
1
1
• Mark the holes to be drilled on the inside of the
front panel and drill them.
• Firmly screw each front-panel bracket 1 to the
front panel with two Hospa pan-head screws
4 x 17 mm.
• Screw the raised-head screws M4 x 12 mm 2 into
the two upper front-panel brackets, Fig. 12.
• Lay the front panel in front of the cabinet.
unten below
20 mm
ca. 1150 mm
- 19 -
Assembly instructions
497 mm
– x
1
2116 mm
– x
730 mm
1
20 mm