Chicco Polly Easy Instrucciones De Uso página 17

or other children, are at a safe distance. Ensure that during these
operations, the movable parts of the highchair do not come into
ts
contact with your child.
rt
1. F ix the legs to the highchair frame as shown in the diagram (dia-
gram 1A - diagram 1B).
an
WARNING: the ends of the front and rear legs have a different
shape to avoid errors in the assembly phase.
se
Rear legs: keep the two locking buttons, located at the base of the
frame, pressed down and insert the legs into the structure. The
at
parts are locked only when the two locking buttons come out
nt
from the holes on the legs, and an audible click is heard, signalling
he
that the legs are securely fitted (diagram 1A).
th
Front legs: keep the two locking buttons located at the base of
the frame pressed down and insert the legs. The parts are correctly
t-
locked only when the two locking buttons come out from the
ee
holes on the legs, and an audible click is heard, signalling that the
.
legs are securely fitted (diagram 1B).
Al-
2. S tand at the back of the Highchair and hold the two joints, then
press the open/close buttons. At the same time, open the High-
chair legs using your foot, until an audible click is heard, signal-
ir,
ling that the legs are locked in the open position (diagram 2).
3. R aise the seat by holding the upper part of the backrest and pull
it upward, until the desired height is reached (diagram 3). The
gs,
Highchair can be adjusted to 7 height positions.
ut
4. L ower the seat and leg rest with your hands (diagram 4). The seat
or
is fixed to the frame by a fastening device.
5. P ress the side adjustment buttons and lower the leg rest in a
nt
vertical position (diagram 5).
it
6. L ower the armrests by pressing the two buttons located at the
rear of the armrests (diagram 6).
er
WARNING: The armrests must always be maintained in a horizon-
tal position. The armrests can be maintained in a vertical position
ng
only when closing the Highchair.
he
7. F ix the fabric covers to the Highchair frame:
A. Fit the fabric cover to the Highchair frame by sliding the safety
e,
harness and D-Rings into the appropriate loops (diagram 7A).
B. Insert the clips into the buckle (diagram 7B).
ed
C. Fit the spring catches (diagram 7C).
8. I nsert the footrest, turn it until the use position is reached, and
he
lock it (diagram 8). The footrest can be adjusted to 3 positions.
The child can now be seated in the Highchair.
9. F it the rigid crotch strap to the activity tray (diagram 9A, diagram
p-
9B). The design of the crotch strap attachment only allows one
type of assembly operation.
WARNING: IMPORTANT FOR YOUR CHILD'S SAFETY - Always fit
the rigid crotch strap to the activity tray before fitting the tray to
ar-
the Highchair. Once the rigid crotch strap has been fitted, it must
never be removed.
The activity tray can now be fitted to the Highchair.
r a
FABRIC COVER
gh-
fix The Polly Easy Highchair version comes with a single padded cover,
as- while the Polly Double Phase version has a double padded cover.
ve The fabric covers of both Highchair versions are padded, and can
be removed and washed.
To remove the cover from the Highchair, repeat, in the reverse order,
ent
the operations described to fit the fabric cover to the frame (Polly
Easy: 7A-7C version, Polly Double Phase version: 7D-7E). With the
Polly Double Phase version, the same operations carried out with
the upper padding must be carried out also with the lower padding.
WARNING: Never use the highchair without the fabric cover.
he
WARNING: When using the Polly Double Phase Highchair, never
ng
use the Highchair only with the upper fabric cover or with the pad-
ne ding fitted to the frame in the reverse order.
SAFETY HARNESS
WARNING: The use of the safety harness and fabric crotch strap is
necessary to guarantee the safety of your child.
WARNING: The activity tray alone does not guarantee the safety
ild,
of your child. Always use the SAFETY HARNESS!
The highchair has a 5-point safety harness.
10. Release the safety harness (diagram 10).
11. P lace the child in the highchair and fasten it with the safety
harness (diagram 11).
The safety harness can be adjusted to two height positions.
FITTING / ADJUSTING THE ACTIVITY TRAY
WARNING: IMPORTANT FOR YOUR CHILD'S SAFETY - Always fit
the rigid crotch strap to the activity tray before fitting the tray to
the Highchair. Once the rigid crotch strap has been fitted, it must
never be removed.
The activity tray can now be fitted to the Highchair.
The activity tray can be adjusted to 4 positions.
12. Hold the activity tray in your hands (diagram 12).
13. P ress and hold the bottom button (X), lower the activity tray
into place checking that the armrests (H) slot into the guides
located under the activity tray (diagram 13).
14. M ove the activity tray until the desired position is reached
and release the button. If the activity tray is not automatically
locked on the armrests, move the activity tray until a click is
heard, signalling that the tray is locked (diagram 14).
WARNING: Always ensure that the tray is locked correctly to the
armrests before use.
WARNING: Never leave the tray fitted in a position in which the
danger signs are visible on the armrests: IT IS NOT safe!
15. T o remove the tray, pull it in an outward direction while keep-
ing the lower button pressed.
ADJUSTING THE HEIGHT OF THE HIGHCHAIR
The Highchair can be adjusted to 7 height positions.
16. T o raise the seat: Hold the upper part of the backrest and pull it
upward, until the desired height is reached (diagram 15).
17. T o lower the seat: Press the two side buttons simultaneously and
lower the seat, until the desired height is reached (diagram 16).
WARNING: Do not carry out this operation with the child sitting
in the Highchair.
RECLINING BACKREST ADJUSTMENT
The backrest of the Highchair can be adjusted to 3 positions.
18. T o adjust the inclination of the backrest, press the button lo-
cated at the rear top, recline the backrest until the desired po-
sition is reached and release the button, the backrest will lock
automatically and an audible click is heard, signalling that it is
locked into position (diagram 17). The operation can be car-
ried out also with the child sitting in the Highchair, although
it can be more difficult.
LEG REST
The leg rest of the Highchair can be adjusted to 3 positions.
19. P ress the two side adjustment buttons and recline the leg rest,
until the desired position is reached (diagram 18).
FOOTREST
The footrest of the Highchair can be adjusted to 3 height positions.
20. F rom the use position, turn the footrest until it is parallel to the
leg rest, and unlock it (diagram 19).
21. Remove the footrest and fit it at the desired height (diagram 20).
22. T urn the footrest until the new desired use position is obtained,
and lock it into position (diagram 21).
WHEELS AND LOCKING SYSTEM
The rear and front legs have swivel wheels with brakes (EE).
To activate the highchair brakes, lower the wheel locking levers. To
release the wheels, repeat in reverse order.
WARNING: Always place the chair on a horizontal, stable surface.
Never place the highchair near stairs or steps.
WARNING: Always engage the parking device when the high-
chair is not being moved.
17