Section 1: Safety Rules
CAUTION
, DO NOT tamper with governed
speed
, DO NOT operate pressure washer above rated pressure.
CAUTION
DO NOT secure spray gun in open position.
DO NOT leave spray gun unattended
while machine is
running.
NEVER use a spray gun which does not have a trigger lock or
trigger guard in place and in working
order,
AN_,ays be certain spray gun, nozzles and accessories are
correctly
attached,
l
[f you have questions about intended use, ask dealer or
contact
Brigs
& Stratton
Power Products.
NEVER operate
units with
broken or missing parts, or
without
protective
housing or covers.
DO NOT by-pass any safety device on this machine.
Before starting
pressure washer in cold weather, check all
parts of the equipment
to be sure ice has not formed there.
NEVER move machine by pulling on high pressure hose. Use
handle provided
on unit.
Check fuel system for leaks or signs of deterioration,
such as
chafed or spongy hose, loose or missing clamps, or damaged
tank or cap. Correct
all defects before operating
pressure
washel'L
This equipment
is designed to be used with Briggs & Stratmn
Power Products
authorized
parts ONLY.
If equipment
is used
with parts that DO NOT comply with minimum
specifications,
user assumes all risks and liabilities.
, DO NOT point spray gun at glass when in iet spray mode.
. NEVER aim spray gun at plants.