KPS MA20 Manual De Funcionamiento página 10

6.5. Battery checking:
• If you see the battery symbol in the LCD
place the batteries to keep the device's precision. (Use batteries of the same
type, do not mix old batteries with new ones).
6.6. Precautions:
• During the MΩ measuring, do not touch the testing tips ends, as the measur-
ing voltage (250, 500 or 1000VDC) is present in those testing tips.
7. SPECIFICATIONS
Display
Megohm
Testing voltage
AC voltage
Continuity
Impedance
Short circuit voltage
Timer
Voltage support
Supply
Dimensions
Weight
Accessories
KPS-MA20 • Insulation meter
, while you are measuring, re-
LCD 3 1⁄2 with a maximum reading of 1999
20MΩ +/-1,5% reading +/- 2 digits
200MΩ +/-2.5% reading +/- 2 digits
2000MΩ +/-5.0% reading +/-3 digits
250V, 500V, 1000V DC +/-10%
0-750V +/-105 % reading +/- 2 digits.
0-200Ω +/-1.5 % reading +/- 2 digits
10MΩ
3mA
automatic OFF after approx. 5 minutes
It fulfils the security requirements Category
II, IEC-1010
1,5V (SUM-3) x 6 pieces.
TYPE AA (high power battery, leakproof)
163 (long.) x 100 (wide) x 52 (deep)mm.
Approx. 430 gr. (batteries included)
Testing tips, batteries, clips, user manual and
brief-case
10