Dry Ironing; Emptying The Water Tank; Care And Cleaning - BEAUTURAL 724NA-0001 Manual De Instrucciones

Vertical
EN
Tip: Use for removing wrinkles from hanging clothes and drapes.
1. With the water tank filled to the Max level, set the temperature
DE
setting and toggle the Variable Steam knob to the appropriate
FR
settings for your fabric. See the fabric guide on the LCD display and
ES
read the garment's label to help you determine which steam setting
to use.
IT
2. Hang the garment to be steamed on a clothes hanger. Curtains or
drapes can be steamed once they are hung.
3. Hold the iron close to, but not touching, the fabric. It is suggested to
hold the iron vertically between 15 to 30mm (0.59 to 1.18in) away
from hanging fabric.
4. Pull the fabric tight in your free hand and press the Steam Burst
button as you move the iron over the fabric.
5. When finished ironing, toggle the Variable Steam knob off
the iron on its heel and unplug the iron.

Dry Ironing

To iron without steam, set the Variable Steam knob off
Using Spray Mist
Tip: For fabrics other than silk, use to dampen tough wrinkles at any
setting.
1. Be sure the iron is filled with water.
2. On first use, press the Spray button
3-Way Auto Shutoff
The automatic shutoff feature works as follows:
1. Once the iron reaches appropriate temperature, it will:
• switch off after 8 minutes of inactivity when the
iron is placed in a vertical position.
• switch off after 30 secondjs of inactivity when the
iron is placed in a horizontal position.
• switch off after 30 seconds of inactivity when the
iron is tipped over on its side.
, stand
.
several times.
07
2. Once shut off, the iron will beep 6 times and the color of the digital
display will turn from blue to red and the screen will flash "PAUSE" .
3. As soon as you pick up the iron, it will start heating again to the set
temperature setting. Wait for the iron to reheat completely before
resuming operation.
Manual Shutoff
When the iron is in normal working status, you can shutoff the iron
manually as follows:
1. Press and hold the Temperature Setting ▲ button for 3 seconds.
2. Press the Temperature Setting ▼ button from high to low until it
shuts off.

Emptying the Water Tank

Note: It is recommended to empty the water tank after each use. This
will prolong the iron's lifespan.
1. Unplug the iron and let it cool.
2. To empty the water, hold the iron over a sink with the tip pointing
down. Water will empty out of the water tank opening.

Care and Cleaning

This product contains no user-serviceable parts. Refer service to
qualified service personnel.
Cleaning
1. Make sure the iron is unplugged and has cooled down completely.
Wipe the soleplate and outer surfaces with a soft cloth dampened
with water and mild household detergent. Never use abrasive,
heavy-duty cleansers, vinegar or scouring pads that may scratch or
discolor the iron.
2. After cleaning, steam iron over an old cloth to remove any residue
from the steam vents.
08
EN
DE
FR
ES
IT