Ironing With Steam; Dry Ironing - BEAUTURAL 724UK-0001 Manual De Instrucciones

Ironing with Steam

EN
1. For steam ironing, make sure the water tank is filled to Max.
DE
2. Make sure the Variable Steam Knob is slid to
FR
Setting button to appropriate steam setting for your fabric.
Note: See the fabric guide on the LCD display and read the garment's label to help
ES
you determine which steam setting to use.
IT
3. Once the selected temperature setting is reached, toggle the Variable Steam Knob
to desired position and start ironing.
4. When finished ironing, toggle the Variable Steam knob off
Note: Ironing with steam is only possible when temperature setting is between
level 6 to level 9. Level 1 to level 5 are for dry ironing only.
Steam Burst
Horizontal
Tip: Use to remove stubborn creases.
1. With the water tank filled to the Max level and make sure the Variable Steam knob
is slid to position, press the Temperature Setting button to appropriate steam
setting for your fabric.
Note: See the fabric guide on the LCD display and read the garment's label to help
you determine which steam setting to use.
2. Once the selected temperature setting is reached, press to Steam Burst button to
start ironing with steam burst.
3. For best performance, press the Steam Burst
4. When finished ironing, stand the iron on its heel and unplug the iron.
Note: Ironing with steam is only possible when temperature setting is between
level 6 to level 9. Level 1 to level 5 are for dry ironing only.
Vertical
Tip: Use for removing wrinkles from hanging clothes and drapes.
1. With the water tank filled to the Max level and make sure the Variable Steam knob
is slid to position, press the Temperature Setting button to appropriate steam
setting for your fabric.
Note: See the fabric guide on the LCD display and read the garment's label to help
you determine which steam setting to use.
position, press the Temperature
.
button at 5-second intervals.
6
2. Hang the garment to be steamed on a clothes hanger. Curtains or drapes can be
steamed once they are hung.
3. Hold the iron close to, but not touching, the fabric. It is suggested to hold the iron
vertically between 15 to 30mm (0.59 to 1.18in) away from hanging fabric.
4. Pull the fabric tight in your free hand and press the Steam Burst
move the iron over the fabric.
5. When finished ironing, stand the iron on its heel and unplug the iron.

Dry Ironing

To iron without steam, set the Variable Steam knob off
Using Spray Mist
Tip: For fabrics other than silk, use to dampen tough wrinkles at any setting.
1. Be sure the iron is filled with water.
2. On first use, press the Spray button
3-Way Auto Shutoff
The automatic shutoff feature works as follows:
1. Once the iron reaches appropriate temperature, it will:
• switch off after 8 minutes of inactivity when the iron is placed
in a vertical position.
• switch off after 30 secondjs of inactivity when the iron is
placed in a horizontal position.
• switch off after 30 seconds of inactivity when the iron is tipped over on its side.
2. Once shut off, the iron will beep 6 times and the color of the digital display will turn
from blue to red and the screen will flash "PAUSE".
3. As soon as you pick up the iron, it will start heating again to the set temperature
setting. Wait for the iron to reheat completely before resuming operation.
Manual Shutoff
When the iron is in normal working status, you can shutoff the iron manually as
follows:
1. Press and hold the Temperature Setting
2. Press the Temperature Setting button from high to low until it shuts off.
button as you
.
several times.
AUTO FF
30 sec. 8 min.
button for 3 seconds.
7
EN
DE
FR
ES
IT