Nevir NVR-800VMUC Manual De Instrucciones página 35

PLEASE NOTE : If you want to encode an entire side of a record and have seperate
MP3 files for each track, you must manually press the STOP/USB/SD Button (15) at
the end of each track and then press the RECORD Button (17) again to start recording
the next track. If you do not manually Stop and Start the recording process after each
track, you will end up with one large MP3 file that will have all the songs from the side of
the record playing one after the other.
The following tasks can be accomplished by either using the controls on the REMOTE
Control or those which have similar function markings on the main unit.

This icon indicates that a task can only be performed using the controls on the unit.
1. Select the USB / CARD function mode by setting the Function selector (12) to
"USB/CARD".
2. Insert either a USB flash drive into the USB PORT (22) or an SD/MMC Memory
Card into the SD/MMC Slot (20). Press and hold the STOP/USB/CARD Button (3)
for 2 seconds to switch between USB and CARD modes if necessary.
3. The total number of tracks on the USB or SD/MMC card will be displayed and
playback will automatically start from the first track depending which mode you have
chosen (USB or CARD).
NOTE : i. Only MP3 file formats are supported.
ii. Not all brands of USB flash drives are supported and only PEN-DRIVE.
iii. The Display will show "NOF" if there are no MP3 files on the USB or
SD/MMC card you inserted.
4. To interrupt playback, press the
5. To resume playback, press the
6. Press the DISPLAY Button (6) once then the Title, Artist and Album of the
playing song if available will be displayed one by one on the LCD.
7. To stop playback, briefly press the STOP button (3).
TRACK SKIP
To select a particular track, in Stop mode or during playback, press the
Buttons (4, 5) repeatedly until the desired track number appears on the display. The
selected track will start playback automatically.
FOLDER SKIP
To select a particular folder, in Stop mode or during playback, press the
the remote control, until the track number (first track number) of the Album appears
in the Display. Playback of the first track of the selected folder will start automatically.
USB / CARD OPERATION

.
The Display will show "USB NO" when the USB port is empty.
button (1). The track being played will flash.
Button (1) again.
6
or
/ in