Nevir NVR-800VMUC Manual De Instrucciones página 38

The files stored on your USB flash drive or on the SD/MMC card can be copied to each
other. Please follow the instructions below to copy the files between the USB port and
the Card slot.
1. Insert your USB flash drive into the USB PORT (22) and the SD/MMC Memory Card
into the SD/MMC Slot (20).
2. Select the USB / CARD function mode by setting the Function selector (12) to
"USB/CARD".
playback will automatically start from the first track.
3. Press the STOP/USB/SD Button once to stop the playback. Copy of the USB files to
the Card is now ready to proceed any time. If you want to copy the files from the
Card to the USB, you need to enter the Card playback Stop mode first then proceed
to Step 4 below for copying.
USB Playback Stop Mode
4. To start copying briefly press the RECORD Button (2) once.
appear briefly and disappear in the Display and copying will then start right away.
Note: "CHE" means "CHECKING". Every file to be copied will be checked before
copying starts.
5. To stop copying, briefly press the STOP Button once.
DELETING FILES
1. With the USB or Card in the playback stop mode, press
select the track to delete, for example track 5 is selected.
2. When the desired track appears in the Display press and hold the RECORD
Button(17) to confirm. 'DEL' will flash few times and then disappear.
The chosen track, '005', will appear and blink in the Display to prompt for
confirmation. In case you want to cancel the delete function just briefly press the
STOP Button.
COPYING FILES BETWEEN USB AND CARD

.
The total number of tracks on the USB will be displayed and
Copying USB Files to Card
Card Playback Stop Mode
Copying Card Files to USB
9
Flashing "CHE" will
or Buttons to