Description - Hilti TE 1 Manual De Instrucciones

Ocultar thumbs Ver también para TE 1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
Obligation signs
Wear eye
Wear a hard
protection
hat
Wear
breathing
protection
Symbols
Read the
Return waste
operating
material for
instructions
recycling.
before use
Hertz
Watts

2 Description

2.1 Use of the product as directed
The power tool is an electrically-powered rotary hammer with pneumatic hammering mechanism.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The power
tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not
as directed.
The power tools are designed for drilling in concrete and masonry.
The working environment may be as follows: construction site, workshop, renovation, conversion or new construction.
The power tool may be used only in a dry environment.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type identification plate.
Do not use the power tool where there is a risk of fire or explosion.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
Modification of the power tool or tampering with its parts is not permissible.
2.2 Chuck
TE‑C CLICK chuck
2.3 Switches
Control switch with electronic speed control
Lockbutton for sustained operation
Wear ear
Wear
protection
protective
gloves
Forward /
Amps
reverse
Volts
Revolutions
per minute
Location of identification data on the power tool
The type designation and serial number can be found
on the type identification plate on the machine or tool.
Make a note of this data in your operating instructions
and always refer to it when making an enquiry to your
Hilti representative or service department.
Type:
Generation: 02
Serial no.:
en
13

Publicidad

Tabla de contenido
loading

Tabla de contenido