Technical Data; Care Instructions; Warranty Conditions - TFK Buggster S Air Instrucciones De Uso

TECHNICAL DATA

Dimensions when pushchair is folded: 103 x 35 x 25 cm
Weight: 6,95 kg
Please find a detailed parts list on our homepage www.buggy.de

CARE INSTRUCTIONS

- Clean all parts with a damp cloth.
- Do not use any caustic cleaning or lubricating agents!
- An oil spray on the folding joints and the wheel bearings will guarantee
smooth running.
- You can wash the seat cover by hand at 30°.
Not suitable for a washing machine or tumble dryer!

WARRANTY CONDITIONS

The statutory provisions shall apply for justified complaints. As proof of
purchase, please keep the till receipt for the duration of the statutory period
of limitation. This term is 2 years *) and starts with the handover of the
product to you. Should any faults arise in relation to this product, they shall
involve any faults of material and manufacture that exist at the date of
transfer. Any claims shall be excluded for:
• Natural wear and damage due to excessive stress
• Damage due to unsuitable or improper use
• Damage due to faulty assembly and commissioning
• Damage due to negligent handling or maintenance
• Damage due to improper modifications to the pushchair
Faults must be notified immediately, so that no subsequent damage can be
caused!
A case for complaint or not?
• Most TFK products are produced to a large extent from aluminium and so
are rust-proof. However, some parts are also painted, galvanized or have
other surface protection. These parts may rust, depending on the level of
maintenance and stress. This can therefore not be regarded as a fault.
• Scratches are normal signs of wear and are not a fault.
• Moist textiles that are not dried can moulder and so can not be considered
as a production-related fault.
• The fading of colours due to sunshine, perspiration, cleaning agents, abrasion or
excessively frequent washing cannot be ruled out and so does not represent a fault.
• Please check carefully at the time of purchase whether all the fabric parts,
seams, press studs and zips are sewn and function properly.
• Worn-down wheels are of course a sign of wear. Damage due to external
influences is not a fault. Slight imbalances are inevitable and do not
represent a fault.
The handover check must always be carried out to prevent inconvenient
problems right at the outset. If you find a fault at a later date, please notify
your authorised dealer immediately. He will then contact us to discuss the
subsequent procedure. Any deliveries to TFK that are unnotified or not
prepaid will not be accepted.
*) valid only in the EU. In other countries according to the respective
warrenty terms.