Disposal; Technical Data - Beurer BY 60 Instrucciones De Uso

9. Disposal

Empty, completely flat batteries must be disposed of through specially designated collection boxes,
recycling points or electronics retailers. You are legally required to dispose of the batteries.
The codes below are printed on batteries containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
For environmental reasons, do not dispose of the device in the household waste at the end of
its useful life. Dispose of the device at a suitable local collection or recycling point. Dispose of
the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.

10. Technical data

Model
Type
Power supply
Voltage (input)
Voltage (output)
Dimensions
Weight
Maximum suction pressure
Permissible operating conditions
Permissible storage conditions
Expected running time
Interval usage
Protection class
Electromagnetic compatibility according to EN 60601-1-2
Safety requirements according to EN 60601-1
Child use and care articles - Drinking equipment according to EN 14350
Device for expressing breast milk
Device with fine vacuum and low flow
Application part, type BF
Device for use in the absence of explosive or poisonous gas mixtures or nitrogen oxides (nitrous
oxide)
Technical information is subject to change without notification to allow for updates
This unit is in line with European Standard EN 60601-1-2 and is subject to particular precautions with
regard to electromagnetic compatibility (EMC). Please note that portable and mobile HF communication
systems may interfere with this unit. More details can be requested from the stated Customer Services
address or found at the end of the instructions for use.
BY 60
BY 40
4 x 1.5 V AA batteries (alkaline batteries)
100-240 V (AC~) 50/60 Hz
6 V (DC ) 1.0 A
168 x 100 x 53 mm
310 g (without batteries)
0.32 bar
+5°C to +40°C, 30% to 85% relative humidity (non-con-
densing), 700 – 1060 hPa ambient pressure
-20°C to +60°C, 10% to 95% relative humidity (non-con-
densing), 700 – 1060 hPa ambient pressure
500 hours
30 minutes ON / 30 minutes OFF
The device is double protected and corresponds to protec-
tion class 2
25