Assembling The Breast Pump; Cleaning And Sterilising The Breast Pump; Usage; Tips To Ensure A Better Milk Flow - Beurer BY 15 Instrucciones De Uso

Extractor de leche manual
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29

6.1 Assembling the breast pump

Once the breast pump has been removed from the packaging, check the plastic containers in particular
for cracks.
1. Screw the pump attachment onto the bottle. Ensure
the pump attachment is fi rmly secured so that no liq-
uid can escape.
2. Attach the handle for the manual pump including the
silicone membrane by pressing the silicone membrane
fi rmly onto the pump attachment until it clicks into
place.

6.2 Cleaning and sterilising the breast pump

WARNING
Clean and sterilise the separate parts of the breast pump that come into direct contact with the
breast milk individually before fi rst use and any further use.
To sterilise the breast pump correctly, proceed as follows:
1. Unscrew the pump attachment from the bottle.
2. Remove the silicone membrane and silicone valve from the pump attachment.
3. Sterilise the bottle and pump attachment (with silicone membrane and silicone valve) for fi ve minutes
in boiling water or using a steam steriliser. Do not use the breast pump until all individual parts are dry.
Do not use any antibacterial cleaning products, as these may damage the plastic on the breast pump.

7. Usage

7.1 Tips to ensure a better milk fl ow
• Choose a location to use the pump where you can relax especially well.
• Choose a time to use the pump when you can relax especially well.
• Having your child nearby or looking at a picture of your child can have a positive eff ect on the milk fl ow.
• If feeding your child using one breast, use the breast pump on the other breast at the same time.
• Warmth and relaxation encourage milk fl ow. Use the breast pump after having a shower or bath.
• If your breasts are swollen or sore, place a warm towel on them for a few minutes. This will improve the
milk fl ow.
• If the milk does not start to fl ow from your breasts immediately, try to relax and then try again a few min-
utes later.
• If the breast pump still does not express any milk from your breasts after fi ve minutes, stop using it and
try again later.
• If you experience any sharp pains when using the breast pump, consult a doctor.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido