Waeco PerfectView M70IP Instrucciones De Montaje página 33

PerfectView M70IP
Remote control
The remote control features the following control elements:
No. in
fig. a,
Label
page 7
1 Mute
2
3
4 Menu
5
6 Call
7 Timer
8
9 Sys
10 Lang
11 Mode
12
EN
Description
Turns the monitor mute.
Flips the display horizontally.
Flips the display vertically.
P
Switches the monitor on and off.
Calls up the menu.
Calls up the menus with the parameters to be set.
Reduces the brightness.
Decreases the value of the selected parameter.
Increases the brightness.
Increases the value of the selected parameter.
Displays the source of the video signal on the display.
Sets the time after which the monitor will automatically shut
off (10, 20, 30, 40 and max. 90 minutes)
Sel Switches between the cameras displayed.
Switches between video standards (Auto/PAL/NTSC).
Selects the display language.
Changes the screen mode (Personal/Stand-
ard/Soft/Vivid/Light)
Selects the previous menu item.
CH CH
CH CH Selects the next menu item.
Technical description
33