Descargar Imprimir esta página

Error Codes; Technische Daten - Jonsered CS2258 Li Manual De Usuario

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 116
Störung
Motor arbeitet, Kette dreht sich,
aber schneidet nicht

Error codes

The error codes help you do troubleshooting on the
battery pack and/or the battery charger while it charges.
LED screen
LED 1 is red and LED 4 is
green, battery pack does not
charge or operate correctly in
product
LED 1 is red
LED 4 is green
LED 1 is red and LED 2 is
green, battery pack does not
charge or operate correctly in
product
RED LED comes on, LED 2
is green and flashes during
charging or when the battery
pack is in the battery charger
RED LED flashes and LED 2
flashes green when the bat-
tery pack is installed.
Motorspezifikationen
Motortyp
Motorspannung
666 - 006 - 03.06.2019
Mögliche Ursache
Kette ist nicht scharf.
Kette ist in die falsche Richtung
installiert.
Possible faults
Possible steps
Internal fuse is
Speak to an approved service center.
blown
Irregular cell volt-
Speak to an approved service center.
age
Battery pack is
Remove the battery pack from the battery charger and install in
overcharged
the product. Operate the product. Battery charger may be de-
fective. Speak to an approved service center.
Battery pack failure Remove battery pack from the product. Do not charge. Battery
pack is damaged and must be replaced. Speak to an approved
service center.
Internal battery
Move the battery charger and battery pack to a location where
tempature is too
the internal temperature of the battery pack can be between
low or too high for
5°C (41°F) and 45°C (113°F).
charging
Internal battery
The internal temperature in the battery must be between -15°C
temperature is too
(5°F) and 70°C (158°F). The environment temperature in the
low or too high
battery pack is too low or too high.

Technische Daten

Lösung
Schärfen Sie die Kette.
Ändern Sie die Richtung der Kette.
(Abb. 59)
If the battery pack is too cold from the ambient environ-
ment, move the battery pack and battery charger to a warm
environment.
If the battery pack is too hot, especially after operation,
move the battery pack and battery charger away from the
hot environment.
V (DC)
Einheit
CS2258 Li
(BCS58VJN)
Bürstenlos
58
97

Publicidad

loading