Skil PL201201 Manual Del Propietário página 14

Chamfering (Fig .11)
The "V" groove in the front base of the tool
allows quick and easy chamfering of workpiece
edges.
a. Place the "V" groove over the edge to be
chamfered. Be sure the blades are not
touching the workpiece.
b. Position the "V" groove absolutely flat on the
edge to be beveled.
c. Grasp the tool firmly with both hands, turn
the tool on and push the planer forward with
steady pressure on the front base of the tool.
14
Fig. 11