Skil LL9325-00 Manual Del Propietário página 17

For Laser Line Projection On Floors
When projecting a laser line on a floor, the LCD display will indicate "-
- -" if the digital angle indication is out of the working range. Use the
included protractor to adjust the direction of laser projection on the
floor.
Mounting
Align the slots on the wall-
mount base with the clamping
mechanism on the protractor, then
slide the wall-mount base into the
protractor until it locks into place;
you will hear a click (Fig. 8).
Attach the tool to the wall-
mount base in the same way as
the corresponding instruction
described in the "FOR LASER
LINE PROJECTION ON WALLS" .
Operating (Fig . 9)
Position the protractor against
•
any corners or any edges of the
floor where you want to use the
tool.
Mount the wall-mount base and
•
the tool accordingly.
Press and hold the power/laser
•
button for about 2 seconds to
turn on the tool. The LCD display
indicates "---" and the laser is turned on automatically.
Rotate the tool according to the angle scale indicator on the
•
protractor so that the laser line is projected in the desired
direction.
Align flooring material with the laser line on the floor surface.
•
Fig. 8 Clamping mechanism
for the wall-mount rotary
base
Slots for clamping
Fig. 9
17