Technical Data; Proper Use - RSLAB 4C Manual De Instrucciones

13- TECHNICAL DATA

Voltage
Frequency
Power
Stirring point position quantity
Max. stirring quantity (H2O)
Max. magnetic bar
Motor
Max. power input of motor
Max. power output of motor
Speed range
Rotary speed display
Speed display accuracy
Hotplate material
Dimensions of workplate
Dimensions of heating
Heating power
Temperature range
Temperature display
Temperature display accuracy
Control accuracy of heating temperature
The safety temperature range of the hotplate
Temperature sensor in medium
Control accuracy of heating temperature sensor
Residual heat warning
Dimensions
Weight
Permitted ambient temperature
Permitted relative humidity
Protection class acc. to DIN 60529
RS232 Interface
Instruction manual 50694130
ENGLISH
200-240/100-120 VAC
50/60 Hz
1050 W (heating) / 50 W
1
20 Liters
80x10 mm
Brushless motor
18 W
10 W
100-1500 rpm
LCD
1 rpm
Glass ceramic
184x184 mm
176x176 mm
1000 W
RT-550 °C
LCD
0,1 °C
1 °C
100-580 °C
PT1000
0,2 °C
50 °C
215x360x112 mm
5,3 kg
5-40 °C
80 %
IP21
Yes
Pag. 22 Version 1 August 2015
temperatures to be measured especially in media which have poor conducti-
vity. The tip of the measuring sensor must be at least 5 mm from the vessel bot-
tom; a distance of 10 mm is ideal.
The instrument can only be disconnected from the main power supply by
pulling out the main plug or the connector plug.
The voltage started on the label must correspond to the main power supply.
Ensure that the main power supply cable does not touch the heating base plate.
Do no cover the device.
The instrument may only be opened by experts.
Keep away from high magnetic field.
Observe the minimum distances between the devices, between the instruments
and the wall and above the assembly (min. 100 mm).

2- PROPER USE

The instrument is designed for mixing and/or heating liquids in schools, laboratories or
factories. This device is not suitable for using residential areas or other constraints men-
tioned in chapter 1.
3- INSPECTION
Unpack the equipment carefully and check for any damages which may have arisen
during transport. If it happens, please contact manufacturer for technical support.
If there is any apparent damage to the system, please do not plug it into the power line.
Instruction manual 50694130
ENGLISH
Pag. 15 Version 1 August 2015