Initial Use; Battery Operation - Beurer Janosch JBY 93 Instrucciones De Uso

6

initial use

Baby unit
You can either use the baby unit with batteries or with the supplied power
supply unit.

Battery operation

1. Loosen the screw in the battery compartment lid and remove the lid.
2. Insert two high-quality 1.5 V AAA batteries the correct way round.
3. Close the battery compartment lid and screw it back on.
The screw is a child safety feature.
Whilst charging, the power LED flashes red. As soon as the battery
is fully charged, it glows red. Please note that only the following
types of battery
The negative battery terminal must be stripped to approx. 5 mm
(= without insulation).
mains operation
Using the power supply unit, connect the baby unit to a socket.
parent unit
Battery operation – charging
The battery must be charged for at least 10 hours before the device can be
first used independently of the mains; you may use the device during this
period. Whilst charging, the power LED flashes red. As soon as the battery
is fully charged, it glows red.
can be charged in the device.
5 mm
25