Beurer Janosch JBY 93 Instrucciones De Uso página 27

If there is no connection between the devices (baby unit not
switched on or out of range), an acoustic warning will sound on the
parent unit (2 beeps).
eco mode setting
+
Range control is not enabled in ECO mode. Therefore, when
activating the ECO mode, ensure that you are and that you stay
within range.
sensitivity setting
When you switch on the device, it is always set to high sensitivity. The LED
(1) goes off. To change to "low" press and hold the ECO button and confirm
with the TALK button. The LED (1) comes on. Pressing again will return it to
"high".
talk function
This baby monitor features a two-way communication function.
Press the TALK button and keep it pressed while you are talking to your
baby.
To access the ECO+ mode, press
the ECO button. LED 4 glows red
and indicates this mode. To switch
it off, press the ECO button again.
27