Grpsel - Gating Group Select; Hook - Hook Flash; Hookd - Hook Flash Duration; Label - Label - ClearOne CONVERGE PRO 880 Manual De Instalación Y Funcionamiento

GRpsel – Gating Group Select
This command selects/reports which Gating Group a microphone input is assigned.
Command Form: DEVICE GRpsel <Channel> [Value]
argument Type size
Channel Channel 1
Group Group 1
Value Channel 2
hooK – Hook Flash
This command sends a hook flash. There is no query for this command.
Command Form: DEVICE hooK <Channel>
argument Type size
Channel Channel 1
Group Group 1
reserved 2
hooKd – Hook Flash Duration
This command selects/reports the hook flash duration.
Command Form: DEVICE hooKd <Channel> [Value]
argument Type
Channel Channel
Group Group
Value unsigned integer
label – Label
This selects/reports the label of the specific channel or the unit.
Command Form: DEVICE label <Channel> <Group> [in/out] [Value]
argument Type
Channel Channel
Group Group
input / output to unsigned integer
matrix
label String
lcdconTRasT – LCD Contrast
This command selects/reports the lCd Contrast Setting.
Command Form: DEVICE lcdconTRasT [Value]
argument Type
Value unsigned integer
values
See Groups and channels
3 (m)
See 4 (G) in Groups and channels
(null to query in text)
values
See Groups and channels
17 (r)
0
size values
1 See Groups and channels
1 17 (r)
2 50 – 2000
(multiples of 10 ms only)
(null to query in text)
size values
1 See Groups and channels
1 1, 2, 3, 4, 5, 6, 7, 8, 12, 13, 14, 16, 17, 20
(i, o, m, G, p , e, l, A, F, S, C, T, r, B)
2 Groups all but 6
Groups 6
20 1 – 20 characters
CleAr = clear the label
(null to query in text)
size values
4 0 (lightest) – 63 (darkest)
(null to query in text)
Units
Units
Units
ms
0
0 = output
1 = input
Units
Appendix A: Serial Commands 225